[Aug-2023] 350-701 Braindumps – 350-701 Questions to Get Better Grades [Q22-Q38]

Explanation
Phishing is a form of social engineering. Phishing attacks use email or malicious web sites to solicit personal, often financial, information. Attackers may send email seemingly from a reputable credit card company or financial institution that requests account information, often suggesting that there is a problem.

Explanation
SQL injection usually occurs when you ask a user for input, like their username/userid, but the user gives (“injects”) you an SQL statement that you will unknowingly run on your database. For example:
Look at the following example, which creates a SELECT statement by adding a variable (txtUserId) to a select string. The variable is fetched from user input (getRequestString):
txtUserId = getRequestString(“UserId”);
txtSQL = “SELECT * FROM Users WHERE UserId = ” + txtUserId;
If user enter something like this: “100 OR 1=1” then the SQL statement will look like this:
SELECT * FROM Users WHERE UserId = 100 OR 1=1;
The SQL above is valid and will return ALL rows from the “Users” table, since OR 1=1 is always TRUE. A hacker might get access to all the user names and passwords in this database.

Explanation The Cisco Umbrella Multi-Org console has the ability to upload, store, and archive traffic activity logs from your organizations’ Umbrella dashboards to the cloud through Amazon S3. CSV formatted Umbrella logs are compressed (gzip) and uploaded every ten minutes so that there’s a minimum of delay between traffic from the organization’s Umbrella dashboard being logged and then being available to download from an S3 bucket. By having your organizations’ logs uploaded to an S3 bucket, you can then download logs automatically to keep in perpetuity in backup storage. Reference: https://docs.umbrella.com/deployment-umbrella/docs/manage-logs The Cisco Umbrella Multi-Org console has the ability to upload, store, and archive traffic activity logs from your organizations’ Umbrella dashboards to the cloud through Amazon S3. CSV formatted Umbrella logs are compressed (gzip) and uploaded every ten minutes so that there’s a minimum of delay between traffic from the organization’s Umbrella dashboard being logged and then being available to download from an S3 bucket.
By having your organizations’ logs uploaded to an S3 bucket, you can then download logs automatically to keep in perpetuity in backup storage.
Explanation The Cisco Umbrella Multi-Org console has the ability to upload, store, and archive traffic activity logs from your organizations’ Umbrella dashboards to the cloud through Amazon S3. CSV formatted Umbrella logs are compressed (gzip) and uploaded every ten minutes so that there’s a minimum of delay between traffic from the organization’s Umbrella dashboard being logged and then being available to download from an S3 bucket. By having your organizations’ logs uploaded to an S3 bucket, you can then download logs automatically to keep in perpetuity in backup storage. Reference: https://docs.umbrella.com/deployment-umbrella/docs/manage-logs

A bridge group is a group of interfaces that the ASA bridges instead of routes. Bridge groups are only supported in Transparent Firewall Mode. Like any other firewall interfaces, access control between interfaces is controlled, and all of the usual firewall checks are in place. Each bridge group includes a Bridge Virtual Interface (BVI). The ASA uses the BVI IP address as the source address for packets originating from the bridge group. The BVI IP address must be on the same subnet as the bridge group member interfaces. The BVI does not support traffic on secondary networks; only traffic on the same network as the BVI IP address is supported. You can include multiple interfaces per bridge group. If you use more than 2 interfaces per bridge group, you can control communication between multiple segments on the same network, and not just between inside and outside. For example, if you have three inside segments that you do not want to communicate with each other, you can put each segment on a separate interface, and only allow them to communicate with the outside interface. Or you can customize the access rules between interfaces to allow only as much access as desired. Reference: https://www.cisco.com/c/en/us/td/docs/security/asa/asa95/configuration/general/asa-95-generalconfig/intro-fw.html Note: BVI interface is not used for management purpose. But we can add a separate Management slot/port interface that is not part of any bridge group, and that allows only management traffic to the ASA.
supported in Transparent Firewall Mode. Like any other firewall interfaces, access control between interfaces is controlled, and all of the usual firewall checks are in place.
Each bridge group includes a Bridge Virtual Interface (BVI). The ASA uses the BVI IP address as the source address for packets originating from the bridge group. The BVI IP address must be on the same subnet as the bridge group member interfaces. The BVI does not support traffic on secondary networks; only traffic on the same network as the BVI IP address is supported.
You can include multiple interfaces per bridge group. If you use more than 2 interfaces per bridge group, you can control communication between multiple segments on the same network, and not just between inside and outside. For example, if you have three inside segments that you do not want to communicate with each other, you can put each segment on a separate interface, and only allow them to communicate with the outside interface. Or you can customize the access rules between interfaces to allow only as much access as desired.
Reference:
A bridge group is a group of interfaces that the ASA bridges instead of routes. Bridge groups are only supported in Transparent Firewall Mode. Like any other firewall interfaces, access control between interfaces is controlled, and all of the usual firewall checks are in place. Each bridge group includes a Bridge Virtual Interface (BVI). The ASA uses the BVI IP address as the source address for packets originating from the bridge group. The BVI IP address must be on the same subnet as the bridge group member interfaces. The BVI does not support traffic on secondary networks; only traffic on the same network as the BVI IP address is supported. You can include multiple interfaces per bridge group. If you use more than 2 interfaces per bridge group, you can control communication between multiple segments on the same network, and not just between inside and outside. For example, if you have three inside segments that you do not want to communicate with each other, you can put each segment on a separate interface, and only allow them to communicate with the outside interface. Or you can customize the access rules between interfaces to allow only as much access as desired. Reference: https://www.cisco.com/c/en/us/td/docs/security/asa/asa95/configuration/general/asa-95-generalconfig/intro-fw.html Note: BVI interface is not used for management purpose. But we can add a separate Management slot/port interface that is not part of any bridge group, and that allows only management traffic to the ASA.

The purpose of above commands is to redirect traffic that matches the ACL “redirect-acl” to the Cisco FirePOWER (SFR) module in the inline (normal) mode. In this mode, after the undesired traffic is dropped and any other actions that are applied by policy are performed, the traffic is returned to the ASA for further processing and ultimate transmission. The command “service-policy global_policy global” applies the policy to all of the interfaces. Reference: https://www.cisco.com/c/en/us/support/docs/security/asa-firepower-services/118644-configurefirepower-00.html FirePOWER (SFR) module in the inline (normal) mode. In this mode, after the undesired traffic is dropped and any other actions that are applied by policy are performed, the traffic is returned to the ASA for further processing and ultimate transmission.
The command “service-policy global_policy global” applies the policy to all of the interfaces.
The purpose of above commands is to redirect traffic that matches the ACL “redirect-acl” to the Cisco FirePOWER (SFR) module in the inline (normal) mode. In this mode, after the undesired traffic is dropped and any other actions that are applied by policy are performed, the traffic is returned to the ASA for further processing and ultimate transmission. The command “service-policy global_policy global” applies the policy to all of the interfaces. Reference: https://www.cisco.com/c/en/us/support/docs/security/asa-firepower-services/118644-configurefirepower-00.html

Reference:
https://www.cisco.com/c/en/us/td/docs/security/esa/esa111/user_guide/b_ESA_Admin_Guide_11_1/b_ESA_Admin_Guide_chapter_01111.html

https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/security/s1/sec-s1-xe-3se-3850-cr-book/sec-s1-xe-3se-3850-cr-book_chapter_01.html#wp3404908137 Displaying the Summary of All Auth Manager Sessions on the Switch Enter the following:
Switch# show authentication sessions
Interface MAC Address Method Domain Status Session ID
Gi1/48 0015.63b0.f676 dot1x DATA Authz Success 0A3462B1000000102983C05C Gi1/5 000f.23c4.a401 mab DATA Authz Success 0A3462B10000000D24F80B58 Gi1/5 0014.bf5d.d26d dot1x DATA Authz Success 0A3462B10000000E29811B94

A posture policy is a collection of posture requirements, which are associated with one or more identity groups, and operating systems. We can configure ISE to check for the Windows patch at Work Centers > Posture > Posture Elements > Conditions > File.
In this example, we are going to use the predefined file check to ensure that our Windows 10 clients have the critical security patch installed to prevent the Wanna Cry malware.