[Q37-Q53] Pass Microsoft Microsoft Security Operations Analyst Exam in First Attempt Guaranteed Updated Dump from TestBraindump!

Rate this post

Pass Microsoft Microsoft Security Operations Analyst Exam in First Attempt Guaranteed Updated Dump from TestBraindump!

Pass SC-200 Exam with 508 Questions – Verified By TestBraindump

Microsoft SC-200 Exam Syllabus Topics:

Section	Weight	Objectives
Topic 1: Mitigate threats using Microsoft 365 Defender	25-30%	– Investigate and respond to threats 1. Respond to threats in Microsoft Defender 2. Analyze alerts and incidents – Configure Microsoft 365 Defender environment 1. Configure security portals and settings 2. Manage roles and permissions
Topic 2: Mitigate threats using Microsoft Defender for Cloud	25-30%	– Respond to cloud security incidents 1. Investigate alerts in cloud workloads 2. Apply remediation steps – Configure cloud security posture management 1. Assess security recommendations 2. Enable Defender for Cloud plans
Topic 3: Mitigate threats using Microsoft Sentinel	40-45%	– Configure Microsoft Sentinel 1. Analytics rules and incidents 2. Workspace setup and data connectors – Perform threat hunting and investigation 1. Investigation graphs and entity analysis 2. KQL queries for hunting threats – Automate response and orchestration 1. Integrate Logic Apps for response 2. Create automation rules and playbooks

Section

Weight

Objectives

Topic 1: Mitigate threats using Microsoft 365 Defender

25-30%

– Investigate and respond to threats

1. Respond to threats in Microsoft Defender
2. Analyze alerts and incidents

– Configure Microsoft 365 Defender environment

1. Configure security portals and settings
2. Manage roles and permissions

Topic 2: Mitigate threats using Microsoft Defender for Cloud

25-30%

– Respond to cloud security incidents

1. Investigate alerts in cloud workloads
2. Apply remediation steps

– Configure cloud security posture management

1. Assess security recommendations
2. Enable Defender for Cloud plans

Topic 3: Mitigate threats using Microsoft Sentinel

40-45%

– Configure Microsoft Sentinel

1. Analytics rules and incidents
2. Workspace setup and data connectors

– Perform threat hunting and investigation

1. Investigation graphs and entity analysis
2. KQL queries for hunting threats

– Automate response and orchestration

1. Integrate Logic Apps for response
2. Create automation rules and playbooks

NEW QUESTION 37
You need to implement the scheduled rule for incident generation based on rulequery1.
What should you configure first?

entity mapping

custom details

event grouping

alert details

NEW QUESTION 38
You need to assign role-based access control (RBAQ roles to Group1 and Group2 to meet The Microsoft Defender for Cloud requirements and the business requirements Which role should you assign to each group?
To answer, select the appropriate options in the answer area NOTE Each correct selection is worth one point.

NEW QUESTION 39
You have an Azure subscription that contains a quest user named Userl and a Microsoft Sentinel workspace named workspacel.
You need to ensure that User1 can triage Microsoft Sentinel incidents in workspace1. The solution must use the principle of least privilege.
Which roles should you assign to User1? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.

NEW QUESTION 40
You have a Microsoft Sentinel workspace
You develop a custom Advanced Security information Model (ASIM) parser named Parser1 that produces a schema named Schema1.
You need to validate Schema1.
How should you complete the command? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.

NEW QUESTION 41
You are using the Microsoft 365 Defender portal to conduct an investigation into a multi-stage incident related to a suspected malicious document. After reviewing all the details, you have determined that the alert tied to the potentially malicious document is also related to another incident in your environment. However, the alert is not currently listed as a part of that second incident.
Your investigation into the alert is ongoing, as it is your investigation into the two related incidents.
You need to appropriately categorize the alert and ensure that it is associated with the second incident.
What two actions should you take in the Manage alert pane to fulfill this part of the investigation?
(Choose two)

Set status to In progress

Set status to New

Set classification to True alert

Enter the Incident ID of the related incident in the Comment section.

Select the Link alert to another incident option.

The correct action to classify the alert would be to set the status to In progress. While the alert may seem to be legitimate as it is linked to another incident, until a final determination is reached, you should set the status to In progress to ensure that others know it is being worked on. Once a determination is reached, you can then change it to Resolved and select the appropriate classification (True alert or False alert).
The correct action to correlate the alert to the other incident would be to select the Link alert to another incident option. While ideally, the alert would automatically be included in both incidents that are not always the case. If you notice an alert that is not linked to an incident that it is clearly connected to, using the Link alert to another incident option ensures they are tied together.
You should not set the classification to True alert. While a point can be made that it seems this malicious file involved in multiple incidents is likely to be a True alert, you cannot yet make that determination. It is also not the time to classify it as a false alert. The best practice while continuing an investigation would be not to change the classification at all, which means leaving it as the default Not set classification.
You should not enter the Incident ID of the related incident in the Comment section. While this might be helpful from an administrative perspective, it creates no link to the other incident.
You should not set the status to New. This is the default status of any alert. The question specifically seeks to ensure your peers know the alert is being investigated, so setting (or leaving) the status as New would make it impossible to differentiate from other uninvestigated alerts.
All of the actions mentioned in the options can be found in the Manage alert pane, which can be reached via the Alerts tab in the Incidents section of the Microsoft 365 Defender portal.
References:
https://docs.microsoft.com/en-us/microsoft-365/security/defender/investigate-alerts
https://docs.microsoft.com/en-us/microsoft-365/security/defender/investigate- incidents?view=o365-worldwide

NEW QUESTION 42
Your company uses Azure Security Center and Azure Defender.
The security operations team at the company informs you that it does NOT receive email notifications for security alerts.
What should you configure in Security Center to enable the email notifications?

Pricing
& settings

Security alerts

Security solutions

Azure Defender

Security policy

NEW QUESTION 43
You have an Azure subscription that contains a Microsoft Sentinel workspace named WS1.
You need to ensure that the incidents in WS1 include a list of actions that must be performed. The solution must meet the following requirements:
* Ensure that you can build a tailored list of actions for each type of incident.
* Minimize administrative effort.
What should you do? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.

NEW QUESTION 44
You are investigating an incident in Azure Sentinel that contains more than 127 alerts.
You discover eight alerts in the incident that require further investigation.
You need to escalate the alerts to another Azure Sentinel administrator.
What should you do to provide the alerts to the administrator?

Create a Microsoft incident creation rule

Share the incident URL

Create a scheduled query rule

Assign the incident

NEW QUESTION 45
You have a Microsoft Sentinel workspace named Workspace1 and 200 custom Advanced Security Information Model (ASIM) parsers based on the DNS schema. You need to make the 200 parsers available in Workspace1. The solution must minimize administrative effort. What should you do first?

Copy the parsers to the Azure Monitor Logs page.

Create a JSON file based on the DNS template.

Create an XML file based on the DNS template.

Create a YAML file based on the DNS template.

NEW QUESTION 46
You need to correlate data from the SecurityEvent Log Anarytks table to meet the Microsoft Sentinel requirements for using UEBA. Which Log Analytics table should you use?

SentwlAuoNt

AADRiskyUsers

IdentityOirectoryEvents

Identityinfo

NEW QUESTION 47
You have a Microsoft Sentinel workspace named sws1.
You need to create a hunting query to identify users that list storage keys of multiple Azure Storage accounts. The solution must exclude users that list storage keys for a single storage account.
How should you complete the query? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.

NEW QUESTION 48
You have a Microsoft Sentinel workspace that contains the following incident.
Brute force attack against Azure Portal analytics rule has been triggered.
You need to identify the geolocation information that corresponds to the incident.
What should you do?

From Overview, review the Potential malicious events map.

From Incidents, review the details of the iPCustomEntity entity associated with the incident.

From Incidents, review the details of the AccouncCuscomEntity entity associated with the incident.

From Investigation, review insights on the incident entity.

NEW QUESTION 49
You have an Azure subscription that uses Azure Defender.
You plan to use Azure Security Center workflow automation to respond to Azure Defender threat alerts.
You need to create an Azure policy that will perform threat remediation automatically.
What should you include in the solution? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.

NEW QUESTION 50
Hotspot Question
You have a Microsoft 365 subscription that contains a user named User1 and uses Microsoft Defender XDR.
You suspect User1 of suspicious activity.
You need to use the Microsoft Graph security API to query for each suspicious activity detected by both Microsoft Defender for Identity and Microsoft Defender for Endpoint during the last three days.
How should you complete the query? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.

NEW QUESTION 51
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You are configuring Microsoft Defender for Identity integration with Active Directory.
From the Microsoft Defender for identity portal, you need to configure several accounts for attackers to exploit.
Solution: You add the accounts to an Active Directory group and add the group as a Sensitive group.
Does this meet the goal?

Yes

NEW QUESTION 52
Hotspot Question
You have a Microsoft 365 E5 subscription that uses Microsoft Defender 365.
Your network contains an on-premises Active Directory Domain Services (AD DS) domain that syncs with Azure AD.
You need to identify the 100 most recent sign-in attempts recorded on devices and AD DS domain controllers.
How should you complete the KQL query? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.

NEW QUESTION 53
You have a Microsoft Sentinel workspace.
You need to create a KQL query that will identify successful sign-ins from multiple countries during the last three hours.
How should you complete the query? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point