[Q15-Q31] Updated NGFW-Engineer Dumps PDF – NGFW-Engineer Real Valid Brain Dumps With 52 Questions!

4.3/5 - (3 votes)

Updated NGFW-Engineer Dumps PDF – NGFW-Engineer Real Valid Brain Dumps With 52 Questions!

100% Free NGFW-Engineer Exam Dumps Use Real Network Security Administrator Dumps

NEW QUESTION 15
Which interface types should be used to configure link monitoring for a high availability (HA) deployment on a Palo Alto Networks NGFW?

HA, Virtual Wire, and Layer 2

Tap, Virtual Wire, and Layer 3

Virtual Wire, Layer 2, and Layer 3

HA, Layer 2. and Layer 3

NEW QUESTION 16
Which two zone types are valid when configuring a new security zone? (Choose two.)

Tunnel

Intrazone

Internal

Virtual Wire

NEW QUESTION 17
How does a Palo Alto Networks firewall choose the best route when it receives routes for the same destination from different routing protocols?

The route that was received first will be entered into the forwarding table, and all subsequent routes will be rejected.

It will attempt to load balance the traffic across all routes.

It compares the administrative distance and chooses the one with the highest value.

It compares the administrative distance and chooses the one with the lowest value.

NEW QUESTION 18
An organization has configured GlobalProtect in a hybrid authentication model using both certificate-based authentication for the pre-logon stage and SAML-based multi-factor authentication (MFA) for user logon.
How does the GlobalProtect agent process the authentication flow on Windows endpoints?

The GlobalProtect agent uses the machine certificate to establish a pre-logon tunnel; upon user sign-in, it prompts for SAML-based MFA credentials, ensuring both device and user identities are validated before granting full access.

The GlobalProtect agent uses the machine certificate during pre-logon for initial tunnel establishment, and then seamlessly reuses the same machine certificate for user-based authentication without requiring MFA.

Once the machine certificate is validated at pre-logon, the Windows endpoint completes MFA on behalf of the user by passing existing Windows Credential Provider details to the GlobalProtect gateway without prompting the user.

GlobalProtect requires the user to log in first for SAML-based MFA before establishing the pre-logon tunnel, rendering the pre-logon certificate authentication (CA) flow redundant.

NEW QUESTION 19
In a Palo Alto Networks environment, GlobalProtect has been enabled using certificate-based authentication for both users and devices. To ensure proper validation of certificates, one or more certificate profiles are configured.
What function do certificate profiles serve in this context?

They store private keys for users and devices, effectively allowing the firewall to issue or reissue certificates if the primary Certificate Authority (CA) becomes unavailable, providing a built-in fallback CA to maintain continuous certificate issuance and authentication.

They define trust anchors (root / intermediate Certificate Authorities (CAs)), specify revocation checks (CRL/OCSP), and map certificate attributes (e.g., CN) for user or device authentication.

They allow the firewall to bypass certificate validation entirely, focusing only on username / password-based authentication.

They provide a one-click mechanism to distribute certificates to all endpoints without relying on external enrollment methods.

NEW QUESTION 20
What is a result of enabling split tunneling in the GlobalProtect portal configuration with the “Both Network Traffic and DNS” option?

It specifies when the secondary DNS server is used for resolution to allow access to specific domains that are not managed by the VPN.

It allows users to access internal resources when connected locally and external resources when connected remotely using the same FQDN.

lt allows devices on a local network to access blocked websites by changing which DNS server resolves certain domain names.

It specifies which domains are resolved by the VPN-assigned DNS servers and which domains are resolved by the local DNS servers.

NEW QUESTION 21
Which two statements describe an external zone in the context of virtual systems (VSYS) on a Palo Alto Networks firewall? (Choose two.)

It is associated with an interface within a VSYS of a firewall.

It is a security object associated with a specific virtual router of a VSYS.

It is not associated with an interface; it is associated with a VSYS itself.

It is a security object associated with a specific VSYS.

NEW QUESTION 22
An NGFW engineer is configuring multiple Panorama-managed firewalls to start sending all logs to Strata Logging Service. The Strata Logging Service instance has been provisioned, the required device certificates have been installed, and Panorama and the firewalls have been successfully onboarded to Strata Logging Service.
Which configuration task must be performed to start sending the logs to Strata Logging Service and continue forwarding them to the Panorama log collectors as well?

Modify all active Log Forwarding profiles to select the “Cloud Logging” option in each profile match list in the appropriate device groups.

Enable the “Panorama/Cloud Logging” option in the Logging and Reporting Settings section under Device –> Setup –> Management in the appropriate templates.

Select the “Enable Duplicate Logging” option in the Cloud Logging section under Device –> Setup –> Management in the appropriate templates.

Select the “Enable Cloud Logging” option in the Cloud Logging section under Device –> Setup –> Management in the appropriate templates.

NEW QUESTION 23
An engineer is implementing a new rollout of SAML for administrator authentication across a company’s Palo Alto Networks NGFWs. User authentication on company firewalls is currently performed with RADIUS, which will remain available for six months, until it is decommissioned. The company wants both authentication types to be running in parallel during the transition to SAML.
Which two actions meet the criteria? (Choose two.)

Create a testing and rollback plan for the transition from Radius to SAML, as the two authentication profiles cannot be run in tandem.

Create an authentication sequence that includes both the “RADIUS” Server Profile and “SAML Identity Provider” Server Profile to run the two services in tandem.

Create and apply an authentication profile with the “SAML Identity Provider” Server Profile.

Create and add the “SAML Identity Provider” Server Profile to the authentication profile for the “RADIUS” Server Profile.

NEW QUESTION 24
Without performing a context switch, which set of operations can be performed that will affect the operation of a connected firewall on the Panorama GUI?

Restarting the local firewall, running a packet capture, accessing the firewall CLI

Modification of local security rules, modification of a Layer 3 interface, modification of the firewall device hostname

Modification of pre-security rules, modification of a virtual router, modification of an IKE Gateway Network Profile

Modification of post NAT rules, creation of new views on the local firewall ACC tab, creation of local custom reports

NEW QUESTION 25
What must be configured before a firewall administrator can define policy rules based on users and groups?

User Mapping profile

Authentication profile

Group mapping settings

LDAP Server profile

NEW QUESTION 26
A large enterprise wants to implement certificate-based authentication for both users and devices, using an on-premises Microsoft Active Directory Certificate Services (AD CS) hierarchy as the primary certificate authority (CA). The enterprise also requires Online Certificate Status Protocol (OCSP) checks to ensure efficient revocation status updates and reduce the overhead on its NGFWs. The environment includes multiple Active Directory forests, Panorama management for several geographically dispersed firewalls, GlobalProtect portals and gateways needing distinct certificate profiles for users and devices, and strict Security policies demanding frequent revocation checks with minimal latency.
Which approach best addresses these requirements while maintaining consistent policy enforcement?

Deploy self-signed certificates at each site to simplify local certificate validation and reduce dependencies on a centralized CA. Turn off certificate revocation checks for lower overhead, rely on IP-based rules for GlobalProtect authentication, and use a single certificate profile for both users and devices.

Distribute the root and intermediate CA certificates via Panorama as shared objects to ensure all firewalls have a consistent trust chain. Configure OCSP responder profiles on each firewall to offload revocation checks to an internal OCSP server while keeping CRL checks as a fallback. Maintain separate certificate profiles for user and device authentication and use an automated enrollment method – such as Group Policy or SCEP – to deploy certificates to endpoints.

Configure each firewall independently to trust the root and intermediate CA certificates. Rely only on manual CRL checks for certificate revocation, and import both user and device certificates directly into each firewall’s local certificate store for authentication.

Obtain wildcard certificates from a public CA for both user and device authentication, and configure firewalls to perform CRL polling at the default update interval. Manually install user certificates on endpoints and synchronize firewall certificate stores through frequent manual SSH updates to maintain consistency.

NEW QUESTION 27
In a hybrid cloud deployment, what is the primary function of Ansible in managing Palo Alto Networks NGFWs?

It provides a web interface for managing NGFW hardware clusters.

It enables centralized log collection and correlation for NGFWs.

It facilitates dynamic updates to NGFW threat databases.

It automates NGFW policy updates and configurations through playbooks.

NEW QUESTION 28
Which type of firewall resource can be assigned when configuring a new firewall virtual system (VSYS)?

Security profile limit

Memory

Sessions limit

ICPU

NEW QUESTION 29
Which statement applies to Log Collector Groups?

Log redundancy is available only if each Log Collector has the same amount of total disk storage.

Enabling redundancy increases the log processing traffic in a Collector Group by 50%.

In any single Collector Group, all the Log Collectors must run on the same Panorama model.

The maximum number of Log Collectors in a Log Collector Group is 18 plus two hot spares.

NEW QUESTION 30
When deploying Palo Alto Networks NGFWs in a cloud service provider (CSP) environment, which method ensures high availability (HA) across multiple availability zones?

Deploying Ansible scripts for zone-specific scaling

Implementing Terraform templates for redundancy within one availability zone

Using load balancer and health probes

Configuring active/active HA

NEW QUESTION 31
Which zone type allows traffic between zones in different virtual systems (VSYS), without the traffic leaving the firewall?

Isolated

Transient

External

Internal

Palo Alto Networks NGFW-Engineer Exam Syllabus Topics:

Topic	Details
Topic 1	PAN-OS Device Setting Configuration: This section evaluates the expertise of System Administrators in configuring device settings on PAN-OS. It includes implementing authentication roles and profiles, and configuring virtual systems with interfaces, zones, routers, and inter-VSYS security. Logging mechanisms such as Strata Logging Service and log forwarding are covered alongside software updates and certificate management for PKI integration and decryption. The section also focuses on configuring Cloud Identity Engine User-ID features and web proxy settings.
Topic 2	Integration and Automation: This section measures the skills of Automation Engineers in deploying and managing Palo Alto Networks NGFWs across various environments. It includes the installation of PA-Series, VM-Series, CN-Series, and Cloud NGFWs. The use of APIs for automation, integration with third-party services like Kubernetes and Terraform, centralized management with Panorama templates and device groups, as well as building custom dashboards and reports in Application Command Center (ACC) are key topics.
Topic 3	PAN-OS Networking Configuration: This section of the exam measures the skills of Network Engineers in configuring networking components within PAN-OS. It covers interface setup across Layer 2, Layer 3, virtual wire, tunnel interfaces, and aggregate Ethernet configurations. Additionally, it includes zone creation, high availability configurations (active active and active passive), routing protocols, and GlobalProtect setup for portals, gateways, authentication, and tunneling. The section also addresses IPSec, quantum-resistant cryptography, and GRE tunnels.

Pass Your NGFW-Engineer Exam Easily With 100% Exam Passing Guarantee: https://www.testbraindump.com/NGFW-Engineer-exam-prep.html

[Q15-Q31] Updated NGFW-Engineer Dumps PDF – NGFW-Engineer Real Valid Brain Dumps With 52 Questions!

Palo Alto Networks NGFW-Engineer Exam Syllabus Topics:

PSE-PrismaCloud Practice Dumps – Verified By TestBraindump Updated 62 Questions [Q26-Q43]

Sample Questions of PCNSA Dumps With 100% Exam Passing Guarantee [Q115-Q139]

2022 Updated Verified PCDRA dumps Q&As – 100% Pass Guaranteed [Q18-Q42]

Leave a Reply Cancel reply

Palo Alto Networks NGFW-Engineer Exam Syllabus Topics:

Related Posts

Leave a Reply Cancel reply