Enhance Your Career With Available Preparation Guide for HPE0-V15 Exam [Q11-Q26]

Q11. A customer needs to integrate a new digital video surveillance solution into their existing environment and available network ports. The solution needs to include redundant hypervisor servers and a redundant SAN with a shared Fibre Channel attached storage array.
You plan to propose the following configuration:
2 HPE DL380 Gen10 servers with dual processors, 384 GB of memory, dual port 10 Gb NIC, and High Performance Fan Kit
1 HPE MSA 2050 Dual Controller Storage Array with 24x 1.8 TB 10 K SAS drives and 96x 7.2K NL drives
4 VMware vSphere Standard licenses
1 VMware vCenter Server Foundation licenses
5 year 24x7x4 support for all equipment
What must be added to the configuration to provide a complete solution? (Choose two.)

Q12. Which feature in a block storage array eliminates redundant data through the process of using indexes that refer to the original set of data?

Q13. What is the process or writing data to two locations within a single array in real time?

Q14. When configuring a single ProLiant Gen10 server, which embedded tool can be used to deploy a reliable and consistent configuration?

Q15. A system administrator is performing the BIOS/Platform configuration of a DL380 Gen10 servers You notice the amber health LED.
The health status of which solution components can be verified with embedded UEFI Diagnostics? {Select two.)

Q16. A customer purchased a Nimble HF20 a year ago They are experiencing an issue with a few of their VMware servers in the RTP Nimble date center and asked that you make a recommendation based on the data in infoSight.
What should you recommend’?

Q17. Which component of HPE iLO provides continuous monitoring of more than 1600 parameters?

Q18. A customer needs a low cost block storage array for targeted workloads. The array needs to provide automated tiering, thin provisioning, and snapshot capabilities.
Which HPE storage solution meets the customer requirements?

Q19. You need to create a dynamic bridge-aggregation group on a FlexFabric switch to ensure the ports are automatically configured with the applicable bridge-aggregation interface configuration Drag the steps on the left Into their appropriate order in the answer area on the right.

Q20. Which network protocol is used to build a loop-free logical topology for Ethernet networks?

Q21. A customer is moving a server from a co-location facility back into their existing data center to comply with new internal policies on data management Due to budget constraints, the customer cannot purchase any additional switches and will need to use an existing end-of-row design with HPE FlexFabric switches While the server will be installed six racks away from the switches, the total cable run with cable management Is expected to be 35 m.
Which component should be selected when designing the 10 Gbps connectivity option for the server?

Q22. A customer is implementing a redundant AD servers to support then lab environment .They have the following requirements
* four rack servers, each with 2 CPUs from AMD. at least 256GB of RAM. FC Dual Port hba
* HPE Nimble AF20 with 17TB useable capacity
* integration into their existing HEP FlexFabric 57io and HPE SN3000B Fibre Channel SAN switches.
it the customer needs more capacity in the future, they will use scale-out growth Which server model should you recommend to this client?

Q23. A customer requests a quote for an HPE storage solution that meets these requirements
* fully redundant dual-controller storage array with no single points of failure
* 1 Gb or 10 Gb ISCSI connectivity
* at least four host-facing ISCSI ports
* capable of expanding usable capacity in small increments of one-to-two disks Which HPE storage solution should be proposed?

Q24. When should you choose to populate a server with LRDlMMs?

Q25. A customer needs to provide inventory management, health monitoring, status alerting, and reporting for their ProLiant servers.
Which HPE management offering meets the customer’s needs?

Q26. A customer requires an entry-level, all-flash system with predictable performance at the lowest possible price. They have performance-sensitive workloads that require speed and efficiency.
Which HPE storage system needs the customer’s requirements?