Prepare Important Exam with 98-366 Exam Dumps(2023) [Q61-Q84]

4.3/5 - (3 votes)

Prepare Important Exam with 98-366 Exam Dumps(2023) 

Pass Exam Questions Efficiently With 98-366 Questions

Microsoft 98-366 Exam Syllabus Topics:

Topic Details
Topic 1
  • Cable types and their characteristics, including media segment length and speed
  • Virtual Private Network (VPN), security zones, firewalls
Topic 2
  • Understand switchesTransmission speed, number and type of ports, number of uplinks
  • Understand the Open Systems Interconnection (OSI) model
Topic 3
  • Transmission speed considerations, directly connected routes, static routing
  • Transmission speed considerations, directly connected routes, static routing
Topic 4
  • Virtual Private Network (VPN), security zones, firewalls
  • Understand local area networks (LANs)

 

Q61. HOTSPOT
You cannot get to any site on the Internet or on the school’s intranet. Your school uses DHCP.
You check your network settings, which are configured as shown in the following image:

You need to change the settings to access websites.
Use the drop-down menus to select the answer choice that completes each statement. Each correct selection is worth one point.
Hot Area:

Q62. Which wireless communication problem is caused by electromagnetic waves?

 
 
 
 

Q63. This question requires that you evaluate the underlined text to determine if it is correct.
In a wireless network that requires an SSL certificate, WEP handles the SSL certificate.
Select the correct answer if the underlined text does not make the statement correct.
Select ‘No change is needed” if the underlined text makes the statement correct.

 
 
 
 

Q64. Which command is used to verify that a server is connected to the network?

 
 
 
 

Q65. DRAG DROP
Match the VPN connection type to the corresponding definition.
To answer, drag the appropriate VPN term from the column on the left to its definition on the right. Each term may be used once, more than once, or not at all. Each correct match is worth one point.
Select and Place:

Q66. The topology of a local area network (LAN) is defined by the:

 
 
 
 

Q67. Which type of network covers the broadest area?

 
 
 
 

Q68. Which of the following is a public IP address?

 
 
 
 

Q69. This question requires that you evaluate the underlined text to determine if it is correct.
The loopback address of your computer is 127.0.0.1.
Select the correct answer if the underlined text does not make the statement correct. Select
‘No change is needed” if the underlined text makes the statement correct.

 
 
 
 

Q70. What are two characteristics of the CSMA/CD access method? (Choose two.)

 
 
 
 

Q71. Drag and Drop Question
Match the VPN connection type to the corresponding definition.
To answer, drag the appropriate VPN term from the column on the left to its definition on the right.
Each term may be used once, more than once, or not at all. Each correct match is worth one point.

Q72. What type of network can you set up that is another company’s internal network?

 
 
 
 

Q73. At what layer in the OSI model are hardware addresses referenced?

 
 
 
 

Q74. Drag and Drop Question
Match each protocol to its description.
To answer, drag the appropriate protocol from the column on the left to its description on the right. Each protocol may be used once, more than once, or not at all. Each correct match is worth one point.

Q75. Teredo tunneling is a protocol that:

 
 
 
 

Q76. HOTSPOT
You are configuring a wireless network with the Wireless Network Properties that are shown in the following image:

Use the drop-down menus to select the answer choice that completes each statement. Each correct selection is worth one point.

Q77. Which technology provides the highest bit rate?

 
 
 
 

Q78. Your home computer is having problems accessing the Internet.
You suspect that your Internet router’s DHCP service is not functioning, so you check your computer’s IP address.
Which address indicates that your router’s DHCP service is NOT functioning?

 
 
 
 

Q79. For which two reasons should you use IPsec between computers? (Choose two.)

 
 
 
 

Q80. Which of these represents the Internet Protocol version 6 (IPv6) loopback address?

 
 
 
 

Q81. One purpose of a perimeter network is to:

 
 
 
 

Q82. If an 802.llg Internet connection has connectivity problems, what may be the cause?

 
 
 
 

Q83. One reason to replace an unmanaged switch with a managed switch is to:

 
 
 
 

Q84. What is an example of a Layer 3 device that connects multiple computers and networks?

 
 
 
 

Exam topics and subtopics

The Microsoft 98-366: Networking Fundamentals exam assesses the candidates’ knowledge of a variety of topics. The skills measured in this test are combined in a number of objectives. They are highlighted below:

  • Understanding Network Infrastructures (30-35%)

    This topic area evaluates your understanding of the concepts of intranet, extranet, and the Internet. This includes firewalls, Virtual Private Network (VPN), and security zones with the focus on Azure network security. The applicants should also have an understanding of local area networks (LANs), in which they have to demonstrate their knowledge of perimeter networks, VLANs, wireless LAN, wired LAN, addressing, and reserved address ranges for the local use. In addition, the learners need to show that they understand wide area networks (WANs), such as cable modem, leased lines, ISDN, dial-up, VPN, DSL, E1, E3, T1, T3, and their characteristics (availability and speed).

    Also, the skills measured under this objective include the usage of wireless networking. You are required to demonstrate your knowledge of types of wireless networking standards along with their characteristics (ac, n, g, b, 11a, 802 including different GHz ranges), point-to-point (P2P) wireless, wireless bridging, ad hoc networks, and types of network security (WEP, WPA, 802.1x, and others).

  • Understanding Protocols and Services (45-50%)

    In this domain, the students have to demonstrate their understanding of the OSI (open systems interconnection) model, TCP and UDP (User Datagram Protocol), Transmission Control Protocol (TCP) model, packets and frames, well-known parts for commonly used purposes, and examples of application, devices, protocols, and which TCP/OSI layer they belong to. This area also involves their knowledge of IPv4, whereby they are required to demonstrate their understanding of IPconfig, subnetting, addressing, the use of IPv4 (Internet Protocol version 4), ipv4toipv6 tunneling protocols for ensuring backward compatibility, gateway, dual IP stack, packets, ports, reserved address ranges for the local use, including local loopback IP. This subject also involves one’s grasp of IPv6, name resolutions, networking services, and TCP/IP.

  • Understanding Network Hardware (20-25%)

    This section includes the examinees’ understanding of switches, routers, and media types. This area encompasses their knowledge of transmission speed, VLAN capabilities, speed of uplinks, number of uplinks, types and number of ports, unmanaged or managed switches, support, hardware redundancy, virtual switches, switching MAC cables and switches, Layer 3 and Layer 2 switches and security options, backplane speed, directly connected routes, routing table memory, Quality of Service (QoS), installing and configuring routing, and cable types and their characteristics.

 

98-366 Questions – Truly Beneficial For Your Microsoft Exam: https://www.testbraindump.com/98-366-exam-prep.html

Related Links: myportal.utt.edu.tt myportal.utt.edu.tt myportal.utt.edu.tt myportal.utt.edu.tt myportal.utt.edu.tt myportal.utt.edu.tt

Leave a Reply

Your email address will not be published. Required fields are marked *

Enter the text from the image below