All Obstacles During 300-815 Exam Preparation with 300-815 Real Test Questions [Q78-Q102]

4/5 - (1 vote)

All Obstacles During 300-815 Exam Preparation with 300-815 Real Test Questions

Fully Updated Free Actual Cisco 300-815 Exam Questions

Cisco 300-815 certification exam is a challenging exam that requires candidates to have a deep understanding of advanced call control and mobility services within a Cisco collaboration solution. Candidates who successfully pass 300-815 exam will have demonstrated their ability to configure and troubleshoot complex call control and mobility services, which is highly valued in the IT industry. Implementing Cisco Advanced Call Control and Mobility Services certification is an excellent way for IT professionals to validate their skills and knowledge in this area and to enhance their career prospects.

 

QUESTION 78
When a third-party SIP Phone System is dialed inbound across a Cisco Unified Border Element, DTMF is failing. The third-party vendor accepts only out-of-band DTMF. Which configuration should be added to the outgoing dial peer to resolve this issue?

 
 
 
 

QUESTION 79
Which description of RTP timestamps or sequence numbers is true?

 
 
 
 

QUESTION 80
What does VoIP trace in a Cisco Unified Border Element do?

 
 
 
 

QUESTION 81
An engineer is configuring Cisco UCM lo forward parked calls back to the user who parked the call if it is not retrieved after a specified time interval. Which action must be taken to accomplish this task?

 
 
 
 

QUESTION 82
An administrator is working on an issue between the customer s Cisco Unified Border Element and the service provider. The provider only wants to see mid-call signaling from the Cisco Unified Border Element for fax calls.
Which command must be configured on Cisco Unified Border Element?

 
 
 
 

QUESTION 83
Cisco SIP IP telephony is implemented on two floors of your company. Afterward, users report intermittent voice issues in calls established between floors. All calls are established, and sometimes they work well, but sometimes there is one-way audio or no audio. You determine that there is a firewall between the floors, and the administrator reports that it is allowing SIP signaling and UDP ports from 20000 to 22000 bidirectionally.
What are two possible solutions? (Choose two.)

 
 
 
 
 

QUESTION 84
Refer to the exhibit.

A company needs to ensure that all calls are normalized to + E164 format. Which configuration will ensure that the resulting digit string +14085554001 is created and will be routed to the E.164 routing schema?

 
 
 
 

QUESTION 85
If all patterns below are configured in Cisco Unified Communications Manager which would be used when dialing the pattern “123”?

 
 
 
 

QUESTION 86
Which two types of distribution algorithm are within a line group? (Choose two.)

 
 
 
 
 

QUESTION 87
How many Cisco Unified Mobility destinations can be configured per user?

 
 
 
 

QUESTION 88
Where on Cisco Unified Communications Manager do you configure the standard local route group for a group of devices?

 
 
 
 

QUESTION 89
An engineer has two cisco UCM Clusters and wants to integrate them using ILS with TLS certificates. Cluster A (pub and 1 subscriber) will be the hub, and Cluster B (pub and 1 subscriber) will be the spoke. Both Clusters have self-signed certificates. The engineer has exchanged Publisher A and subscriber B Tomcat certificates, but the connection fails. What is the cause of the failure?

 
 
 
 

QUESTION 90
Where on Cisco Unified Communications Manager do you configure the standard local route group for a group of devices?

 
 
 
 

QUESTION 91
A single site reports that when they dial select numbers, the call connects, but they do not get audio. The administrator finds that the calls are not routing out of the normal gateway but out of another site’s gateway due to a TEHO configuration. What is the next step to diagnose and solve the issue?

 
 
 
 

QUESTION 92
Refer to the exhibit. A user reports that when they call a specific phone number, no one answers the call, but when they call from a mobile phone, the call is answered. The engineer troubleshooting the issue is expecting the far-end gateway to cut through audio on the 183 Session Progress SIP message. Which SIP Profile configuration element is necessary for the Cisco Unified Communications Manager to send acknowledgement of provisional responses?

 
 
 
 

QUESTION 93
Refer to the exhibit. An administrator is trying to test outbound calls toward the ITSP but cannot complete the call and receives a SIP error. ITSP is consulted, and the issue is that the ANI that is being sent is not the DID provided 8005532447. Which configuration change sends the correct ANI on the INVITE sent to ITSP to fix the error?

 
 
 
 

QUESTION 94
Calls to a particular extension are not routing to voicemail. The user reaches the voicemail system from the handset by pressing the Messages button Which configuration parameter causes this problem?

 
 
 
 

QUESTION 95
Phone A calls to phone B, but phone B has Call Forward All set to a PSTN number. The route list responsible for the phone B call to the PSTN has a standard local route group configured. Which route group must be used to send the call to the PSTN?

 
 
 
 

QUESTION 96
A user requests a feature to send an active call to the mobile phone number on the physical phone. As an administrator, what should be configured in the Cisco UCM to accomplish this?

 
 
 
 

QUESTION 97
Refer to the exhibit.

An administrator is troubleshooting why users are not hearing audio when dialing long distance numbers across their Cisco Unified Border Element. The customer’s carrier has a requirement that dialing long distance requires an access code to be entered. Looking at the exhibit, what two actions can be taken to correct signaling? (Choose two.)

 
 
 
 
 

QUESTION 98
An organization configures a SIP trunk in Cisco UCM to connect to another system. These requirements must be met:
1. Use a specific IP address for SIP signaling.
2. Encrypt the signaling traffic.
3. Restrict which devices can use the SIP trunk. 4 Simplify SIP signaling.
Drag and drop the Cisco UCM configuration steps from the left onto the order on the right to achieve these goals.

QUESTION 99

Refer to the exhibit. Users report that outbound PSTN calls from phones registered to Cisco Unified Communications Manager are not completing. The local service provider in North America has a requirement to receive calls in 10-digit format. The Cisco Unified CM sends the calls to the Cisco Unified Border Element router in a globalized E.164 format. There is an outbound dial peer on Cisco Unified Border Element configured to send the calls to the provider. The dial peer has a voice translation profile applied in the correct direction but an incorrect voice translation rule applied, which is shown in the exhibit. Which rule modified DNIS in the format that the provider is expecting?

 
 
 
 

QUESTION 100
An administrator is implementing a new dial-plan on Cisco Unified Border Element. The administrator must ensure that incoming dial-peers are matched based on the IP address from where the incoming request originates. Which dial-peer configuration should be applied to accomplish this requirement?

 
 
 
 

QUESTION 101
An engineer set up and successfully tested a TEHO solution on the Cisco UCM. PSTN calls are routed correctly using the IP WAN as close to the final PSTN destination as possible. However, suddenly, calls start using the backup local gateway instead. What is causing the issue?

 
 
 
 

QUESTION 102
Refer to the exhibit.

An administrator is troubleshooting a situation where a call placed from a phone registered to Cisco Unified Communications Manager does not complete. The administrator wants to use the Dialed Number Analyzer on Cisco Unified CM to check which translation pattern the call is matching. However, when logging in to Cisco Unified Serviceability there is no option for Dialed Number Analyzer under the tool menu. Which two steps must be performed to resolve this issue? (Choose two.)

 
 
 
 
 

How to book the Cisco 300-815: Implementing Cisco Advanced Call Control and Mobility Services Exam

You must take the following procedures to take part in the Cisco IP Networks (300-815) Examination:

  • Step 1: Click here for the Pearson VUE website
  • Step 2: Sign in or establish an account
  • Step 3: enter the examination number 300-135
  • Step 4: Follow on-line directions
  • Step 5: Taking 300-815 practice exams
  • Step 6: Pay for examination with a credit card or examination voucher

Cisco 300-815 certification exam is ideal for IT professionals who work with Cisco Unified Communications Manager and want to expand their knowledge and skills in advanced call control and mobility services. Implementing Cisco Advanced Call Control and Mobility Services certification is also beneficial for individuals who want to demonstrate their expertise to potential employers and advance their career in the field of IT.

 

Validate your 300-815 Exam Preparation with 300-815 Practice Test: https://www.testbraindump.com/300-815-exam-prep.html

Related Links: myportal.utt.edu.tt myportal.utt.edu.tt myportal.utt.edu.tt myportal.utt.edu.tt myportal.utt.edu.tt myportal.utt.edu.tt

Leave a Reply

Your email address will not be published. Required fields are marked *

Enter the text from the image below